CTRS4-6A Control Box for Obstruction Lights

Short Description

  • With four light outputs
  • With a photocell, bypass switch to adjust auto/manual
  • LED indicators for lights, power and photocell
  • Steady/flashing adjustable
  • 6*alarm contacts (NO&NC) for failures of 4*lights, 1*power and 1*photocell
  • Operation Voltage: 85-265VAC/48VDC/24VDC/12VDC

Compliance

Downloads

Similar to CTRS4 controller, the CTRS4-6A control box is also used for controlling and monitoring RedDot LED low intensity and medium intensity aviation obstruction lights. With a user-friendly interface and easy-to-set switches, customers can configure desired functions and monitor obstruction lighting systems.

There are four light outputs (max. 1A load/output). Practically, for example, under 48VDC, each output connects one OM2K or F864 medium intensity light, or up to eight OL32/OL100 low intensity lights.

CTRS4-6A contains six alarm relays. Four are for four light outputs and two are for power and photocell. Each dry contact includes both NO and NC points. CTRS4-6A is a suitable control box for users to identify which part of the obstruction lighting system fails for easy troubleshooting.

A PHC01 photocell is used for automatically switching on and off the obstruction lighting system from dusk to dawn. Bypass switch on interface panel allows users to bypass the photocell for permanently lightening or testing.